WinToUSB เป็นโปรแกรมที่จะช่วยให้คุณติดตั้งและใช้งาน Windows เวอร์ชั่นต่างๆ ตั้งแต่ XP จนถึง 8.1 ลงใน Flash drive ได้อย่างง่ายดายช่วยให้คุณมี Windows หลายเวอร์ชั่นไว้ใช้งานได้แบบสบายๆ โดย Flash drive ที่นำมาใช้นั้นจะต้องเป็น USB 2.0 และมีพื้นที่ว่างมากพอที่จะติดตั้งลงไปเท่านั้นนะครั บ นับเป็นอีกหนึ่งทางเลือกสำหรับการใช้งาน OS หลาย ๆ ตัวครับ แต่เวลาใช้งานอาจจะช้ากว่าติดตั้งใน HDD ซักนิดนึงครับ
WinToUSB is a free software that allows you to install and run Windows operating system on a USB hard drive or USB flash drive, using an ISO image or CD/DVD drive as the source of installation. WinToUSB also support creating bootable WinPE USB drive, it can help you to transfer the contents of WinPE to the USB drive and make the drive bootable.

Features

Easy-to-use wizard interface that provides step-by-step instructions for installing Windows/WinPE on a USB drive.
Install Windows/WinPE from an ISO image or CD/DVD drive.
Support for Windows NT 6.x OS family (Vista/7/8/8.1/2008/2008 R2/2012/2012 R2) and WinPE 2/3/4/5.
Use any edition of Windows 8(.1) to create Windows To Go USB drive.
Support for MBR and GPT disk layouts.
Don t need install WAIK (Windows Automated Installation Kit) or WADK (Windows Assessment and Deployment Kit).


Important notes

Windows Vista/7/2008/2008 R2 does not have built-in USB 3.0 support, so Windows Vista/7/2008/2008 R2 will have to be booted from a USB 2.0 port.
USB flash drives are very slow. It takes a long time to install and run Windows from a USB flash drive, highly recommend using a USB hard disk.
Windows To Go drives can be booted on different computers, so you can carry it to anywhere and use it on any computer.
Windows 7 is not completely portable. You may have activation and driver problems when booting on different computers.
You need to be an administrator on the computer you are installing the WinToUSB on.


What s New

MBR-based Windows To Go USB drive support booting both BIOS-based and UEFI-based computers
Clone current Windows OS (Windows 7 or later) to a VHD file on a USB drive
Clone current Windows OS (Windows 7 or later) to a USB flash drive
Sector by sector clone Windows OS to a USB drive
German language support


System requirements

Windows XP or later (32/64-bit).
Intel Pentium processor.
256MB of available RAM (512MB or more recommended).
10MB of free space on your hard drive.
800x600 graphic device (higher resolution recommended).

http://www.filecondo.com/dl.php?f=K780541HLAhL