EOBD Facile - OBD2 scanner Car Diagnostic elm327 v3.18.0654 [Patched]

Requirements: 4.0+
Overview: Run a diagnosis on your car with your Smartphone or Android tablet... and discover why your engine light is on... no need to check the manufacturer's manual !

Connect an ELM 327 interface to your car's OBD port (OBD2) and run the application: you will be able to read / delete the engine and transmission fault codes and view data from your vehicle in real time.

Over 1,000,000 downloads already!

Our application requires a Bluetooth or WiFi compatible ELM327 OBD2 interface like the one we offer


• View engine and transmission fault codes (also known as DTCs) and see their meaning (over 5,000 definitions available)

• Delete fault codes

• Clear the MIL : Malfunction Indicator Light (check engine light)

• See manufacturer-specific OBD2 error codes for the following brands: Renault, Peugeot, Citroen, Opel, BMW, Ford, Audi, Volkswagen, Skoda, Fiat, Alfa Romeo, Mercedes, GM, Chevrolet, Pontiac etc.

• Real-time display of vehicle sensors and possibility of recording in a file. Depending on your vehicle's configuration you will be able to see: vehicle speed, engine rpm, engine temperature, ignition timing, engine torque, the amount of air intake, etc.

• Create records of your trips on your SD card and read them using our EOBD-Facile PC/ Mac software

To check whether your vehicle is compatible with the E OBD/OBD2 standard and our application, visit our website where a list of vehicles tested by users of our software is available: http://www.outilsobdfacile.com/vehic...tible-obd2.php

For more information on our application and OBD visit our website: http://www.outilsobdfacile.com

EOBD-Facile Plus Edition features:

In addition to the functions of the EOBD-Facile Basic Edition, the following functions are including in the Plus Edition

+ Saving and reading of OBD fault codes

+ Printing of customised reports

+ Recording of customised reports

+ Check the consistency of vehicle sensor's values

+ Continuous reading of sensor values (6 curves) In the form of a graph

+ Calculation/conversion on registered sensors

+ Commercial use

+ VIN decoder

Whats New:

History Updates:


- Improve connection with Renault vehicle before 2001 (klavkarr only)
- Add data for Renault (engine L7X, …)
- Improve connection with Peugeot (mainly with 206 model)

- Improve reading of fault with VAG (KW1281 available only with klavkarr device)
- Add data for Saab
- Improve connection with Mercedes

- Add data for Opel (engine Z19DT, Z17DTJ, Z10XEP, …)
- Add data for Renault (engine F4R, K4M, …)
- Improve connection with Peugeot (mainly with 307 model)


- Add diagnosis data for Renault (K4M, K4J, …)
- Add more Opel engine (Z10XEP, Z12XEP, …)
- Improve connection with Mazda

- Add more Opel engine (Z19DT, Z17DTJ, Z17DTH, Z22H)
- Fix minor issues

- Improve chart design.

- Improve connection with Opel and ELM327 device
- Improve connection with Nissan vehicule
- Add data for Opel (engine X12XE, X16XE, Y13DT, Z22XE)
- Add data for VIN decipher


This app has no advertisements